Products

F8000 Series Fire Exit Devices

8000 Series Specifications:

·Material - Push bar painted heavy gauge steel, spring of stainless steel.
·Latch Bolts - 3-4′ throw, stainless steel.
·Dead Latch Bolt - 5/8′ stainless steel.
·Strike - For 5/8′ stop, plus shim for 1/2′ stop.
·Projection - 2-1/2′ maximum, 1-7/8′ depressed
·Reversible - Non-handed. Reversible for all functions and trims.
·For Door - 1-3/4′ thick standard. Specify if other than 1-3/4′ thick.
·Backset - 2-3/4′.
·161 Cut Out - Device covers 161 cu out. Some trims require cover plate.
·Sex Bolts - Standard packaging for use with wood, composite or non reinforced doors on vertical rod devices.
·Door Width - For door 2`6′ to 3`0′ wide - 3`0′ standard; for door 3`0′ to 4`0′ wide - 4`0′ standard
·Stile Height - 4-1/4′ min.
·Mounting Height - 40-5/16′ from CL to finished floor recommended.
·Mounting - Furnished standard with sheet metal & machine screws.
·Cylinder - Schlage ‘C’ keyway, other keyways specify.
·Dogging - 1/4 turn, hex key dogging on non-fire-labeled devices.
·U.L. Listed - For panic hardware
·Operation - Inside by slight pressure on any point on the push bar at all times.
·Top Latchbolt - 3/4′ throw, stainless steel.
·Top Deadbolt - 1/2′ throw, steel bolt.
·Bottom Latchbolt - 3/4′ throw, stainless steel.
·Door Height - For door up to 7`0′ high - 7`0′ standard. For door up to 7`0′ to 8`0′ - 8`0′ standard.